Morris 96118 Anyone can use our Above Ground Connector

Morris 96118 Anyone can use our Above Ground Connector, designed to streamline electrical connections and enhance efficiency on the job site. This innovative connector installs in just minutes, significantly reducing labor hours by eliminating the need for wire stripping, connecting, and taping of split bolts. It can be utilized on energized circuits without requiring power shutdowns, making it ideal for overhead services, street lighting, and various splicing applications. The double shear-head bolt ensures proper torque tightening every time, preventing hot spots and ensuring reliable connections. With no cable stripping required, simply insert the jacketed cable into the entry port and tighten with a 1/2" socket. The connector’s design keeps all external parts isolated from energized components, prioritizing installer safety. Constructed from high-strength fiber-reinforced thermoplastic and galvanized steel bolts, the Morris 96118 is built to withstand harsh conditions. It offers a corrosion-free connection suitable for hot, cold, damp, and salty environments. A water-tight seal is achieved during installation, protecting the connection from moisture. UL486B Listed for copper to copper, aluminum to aluminum, and copper to aluminum connections, the Morris 96118 is rated for 600 volts and 194°F (90°C), meeting ANSI C119.4 requirements. With a torque rating of 330 inch-lbs, this connector guarantees a reliable, long-lasting performance.

Anyone can use our Above Ground Connector

• Above ground connector can be installed on Energized Circuits eliminating Power Shutdowns
• No cable stripping required, simply insert the jacketed cable into the entry port & tighten with a 1/2" 6 point socket
• Eliminates Wire Stripping, Connecting & Taping of Split Bolts and Adding Inhibitor
• Double shear-head bolt guarantees correct torque tightening every time, ensuring a quality connection, & eliminating the possibility of hot spots, damaged wires or loose connections
• The connector bodies are made from high-strength fiber-reinforced thermoplastic and galvanized steel bolts
• Can be installed on energized conductors, however, the tap must not be under load.
• UL486B Listed for cu to cu, al to al, & cu to al; 600 Volt, 194°F (90°C) Rated, Meets ANSI C119.4 requirements
• Overhead services - both insulated & bare mains, above grade URD services, street lighting, non-tension splicing & tapping, insulated replacement for split bolts, tapping without cutting the main, gutter taps.
• Corrosion-free connection is good for hot, cold, damp, & salty connections. Properly installed the connector seals water-tight. This is accomplished by a sealant tank, that during installation is compressed and forces sealant out to protect the connection from oxygen and water. Copper teeth are tin plated, shell is high strength UV resistant thermoplastic insulating material, steel bolts are galvanized.
• Connector Installs In Just Minutes Saving Many Man-Hours On The Job
• The bolt and all external parts of the connector are completely isolated from energized parts and the bolt is covered by the plastic shear-head. The installer has no contact at any point with an energized part.
• Model #'s: 96102 (TTD0510F), 96104 (TTD0810F), 96106 (TTD1010FBTUNI), 96108 (TTD1510FT), 96110 (TTD1810XFBTUNI), 96112 (TTD2110FBTUNI), 96114 (TTD2710FBTUNI), 96116 (TTD4010FBT), 96118 (TTD4310FBT), 96120 (TTD4510FT), 96122 (TTD5510FBT)

Resources

• Catalog PDF page
• Spec Data Sheets
• Spec Sheet