Morris 96120 Anyone can use our Above Ground Connector

Morris 96120 Above Ground Connector offers a revolutionary solution for electrical connections, streamlining the installation process significantly. Designed for ease of use, this connector can be installed in just minutes, eliminating the need for wire stripping, connecting, and taping of split bolts. What sets this connector apart is its ability to be installed on energized circuits, allowing work to proceed without power shutdowns. This versatile connector is suitable for a variety of applications, including overhead services, insulated and bare mains, street lighting, and non-tension splicing. The double shear-head bolt ensures proper torque tightening every time, preventing hot spots and loose connections while guaranteeing a quality installation. No cable stripping is required; simply insert the jacketed cable into the entry port and tighten it using a 1/2" socket. Manufactured from high-strength fiber-reinforced thermoplastic and galvanized steel bolts, the Morris 96120 connector is corrosion-free and suitable for use in hot, cold, damp, and salty environments. Its water-tight seal is achieved through a unique sealant tank that protects connections from moisture. UL486B Listed and rated for 600 volts and 194°F (90°C), this connector meets ANSI C119.4 requirements, ensuring reliability in all conditions.

Anyone can use our Above Ground Connector

• Above ground connector can be installed on Energized Circuits eliminating Power Shutdowns
• No cable stripping required, simply insert the jacketed cable into the entry port & tighten with a 1/2" 6 point socket
• Eliminates Wire Stripping, Connecting & Taping of Split Bolts and Adding Inhibitor
• Double shear-head bolt guarantees correct torque tightening every time, ensuring a quality connection, & eliminating the possibility of hot spots, damaged wires or loose connections
• The connector bodies are made from high-strength fiber-reinforced thermoplastic and galvanized steel bolts
• Can be installed on energized conductors, however, the tap must not be under load.
• UL486B Listed for cu to cu, al to al, & cu to al; 600 Volt, 194°F (90°C) Rated, Meets ANSI C119.4 requirements
• Overhead services - both insulated & bare mains, above grade URD services, street lighting, non-tension splicing & tapping, insulated replacement for split bolts, tapping without cutting the main, gutter taps.
• Corrosion-free connection is good for hot, cold, damp, & salty connections. Properly installed the connector seals water-tight. This is accomplished by a sealant tank, that during installation is compressed and forces sealant out to protect the connection from oxygen and water. Copper teeth are tin plated, shell is high strength UV resistant thermoplastic insulating material, steel bolts are galvanized.
• Connector Installs In Just Minutes Saving Many Man-Hours On The Job
• The bolt and all external parts of the connector are completely isolated from energized parts and the bolt is covered by the plastic shear-head. The installer has no contact at any point with an energized part.
• Model #'s: 96102 (TTD0510F), 96104 (TTD0810F), 96106 (TTD1010FBTUNI), 96108 (TTD1510FT), 96110 (TTD1810XFBTUNI), 96112 (TTD2110FBTUNI), 96114 (TTD2710FBTUNI), 96116 (TTD4010FBT), 96118 (TTD4310FBT), 96120 (TTD4510FT), 96122 (TTD5510FBT)

Resources

• Catalog PDF page
• Spec Data Sheets
• Spec Sheet