Morris 97640 Dual Entry Cable Connector for Simple, Fast Electric Splicing

Morris 97640 Dual Entry Cable Connector simplifies electric splicing and tapping, making it quick and efficient for any project. Designed with wire entry from either side, this connector offers versatility and ease of use. Its rugged high-dielectric rubber/vinyl coating ensures robust insulation, while the pre-filled oxide inhibitor enhances electrical performance and longevity. This connector is crafted from CU9AL dual-rated 6061-T6 aluminum, making it suitable for both copper and aluminum wires. Each terminal accommodates one wire, and the easy re-entry feature allows for modifications, inspections, or troubleshooting without hassle. The plugs are clearly marked with the maximum wire size, facilitating straightforward identification. The Morris 97640 operates effectively within a temperature range of –49°F to 194°F (–45° to 90°C) and is ANSI C119.4 & cULus 486b listed for use up to 750MCM. Rated for 600 volts at 194°F (90°C), this connector is intended for indoor use only. With dimensions of 1.85" in height and 6.03" in length, it’s designed for efficient installation. Trust the Morris 97640 for reliable connections that stand the test of time.

Our Dual Entry Cable Connector makes electric Splicing & Tapping Simple Fast & Easy

• Temperature Range of –49°F to 194°F (–45° to 90°C)
• Pre-Filled with Oxide Inhibitor
• Indoor Use Only
• Rated 194°F(90°C) 600 Volt
• Plugs Marked with Connector Max Wire Size for easy identification
• ANSI C119.4 & cULus 486b Listed thru 750MCM
• Wire Entry from Either Side of connector
• Insulated with rugged high-dielectric Rubber/Vinyl Coating
• Easy Re-entry for Changes, Inspection or Troubleshooting
• Dual Entry Cable Connector is CU9AL Dual Rated 6061-T6 Aluminum for use with Copper and/or Aluminum wires
• Dimension Measurements = Inches
• One Wire per Terminal
• UV-Resistant Plastisol Insulation

Resources

• Catalog PDF page
• Spec Data Sheets
• Spec Sheet
• Spec Sheet