Napco Security Alarm GEM-PIR Wireless Motion Detector PIR offers exceptional performance and reliability for your security needs. Designed for seamless integration with Napco's GEM-series wireless receivers, this advanced PIR sensor operates on two 3-volt lithium batteries, ensuring long-lasting service life. The GEM-PIR features unique factory-programmed RF ID codes, eliminating the need for coding switches and enhancing security by distinguishing itself to the receiver. One of its standout features is signal selective processing, which guarantees reliable operation while minimizing false alarms caused by radio-frequency interference. The sensor provides extensive coverage of 50' x 50' (15.2m x 15.2m) at 20°C (68°F) and is versatile in installation, with options for wall or corner mounting up to 10' (3m) high. Its compact design, measuring just 4.5'' x 2.5'' x 1.7'', houses a dual-element sensor with a large lens area for high sensitivity. Additionally, the GEM-PIR is equipped with vertical and horizontal aiming capabilities, a lens bank for optional accessory lenses, and a built-in tamper microswitch for added security. Operating within a temperature range of 0° to +50°C (32° to 122°F), the GEM-PIR is a reliable choice for any security setup.
Wireless Motion Detector PIR
The GEM-PIR is an advanced PIR sensor designed for use with Napco's GEM-series wireless receivers. The unit is powered by two 3-volt lithium batteries (supplied) for long service life. When battery voltage drops below normal, a low-battery report will be sent to the receiver (replace with Duracell DL123A or Varta/ power-one CR123A only). Coding switches are not used in the GEM-PIR. Each transmitter has a unique factory-programmed RF ID code (printed on the unit) that distinguishes itself to the receiver.
Features:
Specifications:
Alternate Codes: 115697, GEM-PIR, GEMPIR
Category: Access Control, Alarms & Intercom, Burglar Alarms, Switches, Sensors & Contacts
Part Type: Detectors
Style: Motion Sensor
