NGP 675DKB 48" DKB-finish Aluminum Concealed Fastener with Nylon Brush Sweep or Perimeter Seal offers a robust solution for commercial restroom partitions. Constructed from high-quality aluminum alloy 6063 with a T5 temper, this fastener ensures both durability and performance. The black nylon brush provides excellent abrasion resistance, flexibility, and memory, effectively sealing gaps while remaining moisture resistant. With a temperature tolerance ranging from -70°F to 425°F, this fastener performs reliably in a variety of environments. It is BHMA Certified to ANSI/BHMA A156.22 standards, reflecting its compliance with rigorous performance tests for heat and cold. The snap-on cover not only conceals screw heads for a clean aesthetic but also simplifies installation with slotted screw holes for adjustment. Included with the fastener are #6 x 3/4" stainless steel sheet metal screws, enhancing its longevity and resistance to corrosion. The dark bronze finish adds a sophisticated touch, making it suitable for various restroom designs. Additionally, it is REACH and RoHS compliant, ensuring safety and environmental responsibility. For building professionals looking for reliable and stylish partition hardware, the NGP 675DKB is a top choice.
48" DKB-finish Aluminum Concealed Fastener with Nylon Brush Sweep or Perimeter Seal
BHMA: BHMA Certified to ANSI/BHMA A156.22 Performance Tests for Heat and Cold
Color: Nylon brush is black
Fasteners: #6 x 3/4" stainless steel sheet metal screws furnished
Finish: Dark bronze finish
Length: 48.0"
Material: Synthetic polymer: Polyamide
Moisture Resistant: YES
Resistance: Excellent abrasion resistance, flexibility and memory
Ro HS: REACH and RoHS compliant
Standard-0: CERTIFIED by UL to CAN/ULC-S104 and ANSI/UL10B, complies with NFPA 80 and NFPA 252 for application to Hollow Metal fire doors rated up to 3 Hrs., and Wood fire doors rated up to 90 minutes.
Standard-1: POSITIVE PRESSURE - CERTIFIED by UL to ANSI/UL10C, complies with IBC, NFPA 80 and NFPA 252 for application to Hollow Metal fire doors rated up to 3 Hrs., and Wood fire doors rated up to 90 minutes.
Standard-2: AIR INFILTRATION TESTED to ASTM E283, Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors.
Standard-3: SMOKE & DRAFT CONTROL GASKETING. Certified by UL to ANSI/UL10C and ANSI/UL1784 Category ‘H’; complies with IBC and NFPA 105 for use on ‘S’ labeled Positive Pressure Hollow Metal fire doors rated up to 3 hours, and Wood fire doors rated up to 90 minutes.
Standard-4: ANSI/BHMA CERTIFIED. Certified Gasketing complies with American National Standard for Door Gasketing and Edge Sealing Systems ANSI/BHMA A156.22 and is listed in the BHMA Certified Products Directory.
Temperature Range: Temperature range -70°F to 425°F
