NGP AFDL 12X12 No Vision Door Louver for 1-3/4in Thick Doors, Gray Primer

National Guard Products Inc AFDL 12X12 No Vision Door Louver is expertly designed for 1-3/4 inch thick doors, making it an ideal choice for both commercial and residential applications. Crafted from durable 18-gauge cold rolled steel, this louver features mitered and welded corners, ensuring long-lasting structural integrity. The inverted "V" design enhances airflow while the blades, made of 24-gauge steel with hemmed edges, provide additional strength and safety. This louver boasts a free area of 55%, allowing for optimal ventilation without sacrificing security. Installation is straightforward, thanks to the countersunk mounting screw holes and the included #8 X 3/4" Phillips head screws. It is available in various uneven and fractional sizes, catering to specific door requirements. The AFDL 12X12 is finished in a gray primer (GPZ) powder coat, offering both aesthetic appeal and protection against the elements. Optional features such as an aluminum insect screen and Torx security screws enhance its versatility. For those seeking additional durability, galvanneal A40 steel and zinc electroplating options are available. National Guard Products Inc ensures that this louver meets door industry tolerances of +/- 1/16", making it a reliable choice for your next project.

No Vision Door Louver for 1-3/4in Thick Doors, Gray Primer

• For 1-3/4" thick doors
• 18 Ga. cold rolled steel
• Mitered and welded corners
• Welded reinforcing clips at corners
• Inverted "V" design
• Blades 24 Ga. steel; hemmed edges
• Countersunk mounting screw-holes
• #8 X 3/4" Phillips head SMS
• Available in uneven and fractional sizes
• Free area 55%
• Gray primer (GPZ) powder coat finish
• Designed for use on 1-3/4" thick doors manufactured within door industry tolerance of +/- 1/16"
• Options: Aluminum insect screen - 22 Ga. 1/8" square mesh installed on exterior side unless requested otherwise: "supplied loose for interior side installation"
• Options: Torx security screws
• Options: Galvanneal - A40 steel
• Options: Zinc electroplating (not available on insect screen)

Features

• Available in uneven and fractional sizes
• Options: Galvanneal - A40 steel
• Options: Aluminum insect screen - 22 Ga. 1/8" square mesh installed on exterior side unless requested otherwise: "supplied loose for interior side installation"
• Blades 24 Ga. steel; hemmed edges
• Mitered and welded corners
• Welded reinforcing clips at corners
• For 1-3/4" thick doors
• Designed for use on 1-3/4" thick doors manufactured within door industry tolerance of +/- 1/16"
• Free area 55%
• Inverted "V" design
• Gray primer (GPZ) powder coat finish
• Options: Zinc electroplating (not available on insect screen)
• 18 Ga. cold rolled steel
• Options: Torx security screws
• #8 X 3/4" Phillips head SMS
• Countersunk mounting screw-holes