Paxton Access Inc. 682-493-US Net2 Plus is a state-of-the-art single door controller designed to enhance your security management capabilities. This advanced control unit operates without an enclosure and utilizes TCP/IP connectivity, making it a flexible solution for modern access control needs. With the ability to support up to 50,000 users, it offers extensive scalability, accommodating a maximum of 500 doors and 200 TCP/IP connections. Net2 Plus is engineered for seamless integration into your existing network infrastructure, ensuring efficient access control with minimal setup complexity. It features a robust data retention capability, preserving information for up to 28 days in the event of total power loss. The controller supports a variety of access methods, including PIN codes and tokens, both capable of accommodating 50,000 entries each. Communication is streamlined with both RS485 and TCP/IP protocols, allowing for the connection of multiple control units through a dedicated network. The system supports up to 64 time zones and 250 access levels, enabling precise control over access permissions. Built with durability in mind, the Net2 Plus operates efficiently within a range of environmental conditions, making it a reliable choice for both residential and commercial applications. Elevate your security with Paxton Access Inc. 682-493-US Net2 Plus today.

Net2 Plus, Single Door Controller Without Enclosure, TCP/IP, DHCP, 26 Bit Wiegand, 12-24VDC, UL, FCC

Net2 is a PC based security system for controlling access through doors. Net2 allows users to be given access to particular areas at certain times. Because the system is networked, all administration can be done from a central point. Net2 plus is one of three control units for the Net2 system. It is the most advanced control unit, employing the latest technology and offering huge potential for future expansion. As security technology develops, Net2 plus can take full advantage. Using Net2 plus ensures that the investment in access control is safe no matter how the system requirements change. Net2 plus has on-board TCP/IP to allow direct connection to a computer network. This can save time, money and result in a better, more resilient system. Net2 plus control units can also be connected together using a dedicated RS485 network. This reduces the number of TCP/IP network points required for larger systems.

Features:

• Total users: 50,000
• Total doors:
• Max 500 doors
• Max 200 per RS485 data line
• Max 100 TCP/IP connections
• Number of tokens: 50,000
• Number of PIN's: 50,000
• PIN length: 4 - 8
• Number of codes: 50
• Code length: 4 - 8
• Number of time zones: 64
• Number of time slots: 2,000
• Number of access levels: 250
• Stored events per ACU: 2,728
• Data retention during a total power loss: 28 days
• Clock and data: Yes
• Custom Wiegand: Yes
• Door open time: Min 1 sec - Max 999,999 sec
• Reader ports per ACU: 2
• Readers/Keypads per ACU: 4 - check current draw on individual readers
• Combined reader port output current: 500 mA
• Software required: Net2 v4.14 and above

Communication:

• RS485: 200 ACU's per data line
• TCP/IP Ethernet: ACU has an on-board TCP/IP to RS485 converter
• TCP/IP nodes: Max 200
• Data lines per PC: Max 100
• Ethernet network speed: 10 Mbit/s - 100 Mbit/s auto MDIX
• Ethernet bandwidth requirement: 200 kbit/s
• DHCP support (fixed IP recommended): Yes
• RS485 network speed: 115.2 kbit/s

Hardware:

• Supply voltage: Min 11V DC - Max 15V DC
• Supply current: 200 mA
• Relay switchable voltage: 24V DC
• Relay switchable current: 4 A
• Alarm output current: 1 A
• Operating temperature - battery limits: Min 32°F - Max +131°F
• Reader cable type: Belden 9540
• Data cable type: CAT5 or Belden 8723

Resources

• Cut Sheet