Falcon Lock RX-MEL-25C-L-BE-QUA-US26D-36X96-RHR RX Request to Exit Motorized Latch, Concealed Vertical Rod, Satin Chrome

Falcon Lock RX-MEL-25C-L-BE-QUA-US26D-36X96-RHR KIT offers an advanced solution for secure and efficient access control. This motorized electric latch retraction (MEL) exit device is designed for both multifamily and commercial settings, providing an energy-efficient means of controlling egress without sacrificing security. The device features a concealed vertical rod that ensures a clean aesthetic while maintaining robust performance. With a Grade 1 rating, the RX-MEL-25 excels in durability and reliability. It seamlessly integrates with credential readers to allow momentary unlatching for authorized users, making it a practical choice for high-traffic areas. The self-calibrating motor assembly and on-board diagnostics facilitate easy installation and troubleshooting, ensuring minimal downtime. The device measures 36 inches by 96 inches and is available in a sleek satin chrome finish (626/US26D), adding a modern touch to any entryway. It operates on a 24VDC, 1 Amp power supply, compatible with various Schlage power supplies. Additionally, the vandal-resistant features detect and respond to tampering attempts, enhancing overall security. For professionals seeking a reliable and efficient exit device, the Falcon Lock RX-MEL-25C-L-BE-QUA-US26D-36X96-RHR KIT represents a smart investment in safety and convenience.

KIT - RX Request to Exit, Motorized Electric Latch Retraction, Concealed Vertical Rod Exit Device, Blank Escutcheon x Quantum Lever Trim 510L-BE, 36in x 96in, RHR Right Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged