Sargent 12-8715G LHR 32D SVR Exit Device with Passage

Sargent 12-8715G LHR 32D SVR Exit Device, Passage is a Grade 1 surface vertical rod exit device designed for robust security in high-traffic environments. Featuring a wide stile pushpad and a 48-inch fire-rated design, this exit device is suitable for 96-inch door heights, ensuring compliance with safety regulations. The left-hand reverse configuration allows for seamless integration into your building's layout, while the less dogging feature enhances accessibility. Constructed to exceed ANSI/BHMA Grade 1 requirements, the Sargent 80 Series exit devices are recognized for their durability and low-maintenance design. With modular construction and minimal moving parts, these devices promise longevity and reliability throughout the life of the building. Two-point latching is adjustable through the center case, allowing for precise installation on wood or metal doors ranging from 1-3/4 inches to 2-1/4 inches in thickness. Ideal for both commercial applications, this exit device supports door widths from 43 inches to 48 inches without the need for cutting. Finished in satin stainless steel (630/US32D), it offers a sleek appearance that complements various architectural styles. Trust the Sargent 12-8715G to deliver the strength, simplicity, and innovation you need for secure egress solutions.

SVR Exit Device, Passage

Grade 1 Surface Vertical Rod Exit Device, Wide Stile Pushpad, 48" Fire-Rated Device, 96" Door Height, Passage Function, Less Dogging, Satin Stainless Steel Finish, Left Hand Reverse

The Sargent 80 Series exit devices are ideal for environments that require strong and durable security solutions that will last the life of the building. Available in rim, mortise, surface vertical and concealed vertical rod configurations, these exit devices easily exceed ANSI/BHMA Grade 1 requirements for cycle and strength. With modular construction and few moving parts, the 80 Series devices are maintenance-free and provide unsurpassed security for any facility. Plus, options are available for unique applications including delayed egress, alarmed exit and electric latch retraction making these exit devices the go-to product in your building.

Has two point latching and is adjustable through the center case.

Part of Sargent's full line of exit devices that provide the best combination of simplicty, strength, durability, aesthetics, and innovation. The top and bottom latchbolt projection is adjustable through the center case. 

• Door Types: Wood or metal 1-3/4"(44mm) Thick Door; Over 1-3/4" to 2-1/4" specify thickness and order as a 31- prefix.  4-1/2" (114mm) minimum stile with trim and 3-1/2" (44mm) minimum stile without trim
• Door Widths:E Rail - 24" to 32" (61cm to 81cm) No cutting required for 32" door; F Rail - 33" to 36" (84cm to 91cm) No cutting required for 36" door; J Rail - 37" to 42" (94cm to 107cm) No cutting required for 42" door; G Rail - 43" to 48" (110cm to 122cm) No cutting required for 48" door

Resources

• 12-HC8700 Top Case Parts List
• 14-8700 Series Surface Vertical Rod Series Bottom Case Parts List
• 16- 816 Cylinder Dogging Kit (80 Series Exit Device) Installation Instructions
• 43-Flush End Cap Rail Cutting Installation Instructions
• 55-Signal Switch for 80 Series Installation Instructions
• 56-Electric Latch Retraction Exit Device Sell Sheet
• 565 & 665 Metal End Cap Kit Installation Instructions
• 57-Delayed Action 80 Series Exit Device Installation Instructions
• 57-Delayed Egress for 80 Series Exit Devices to ElectroLynx Connector System Installation
• 59-8700 Surface Vertical Rod Chassis Parts List
• 59-Electroguard Delayed Egress for 80 Series Exit Devices Installation Instructions
• 80 Series Brochure
• 816 Cylinder Dogging Kit Parts List
• 8600/8700/8800/8900 Wide Stile Rail Assemblies Parts List
• 8700 Series Surface Vertical Rod Exit Devices Cut Sheet
• AL- Alarmed Exit Device Installation Instructions
• Basic Fundamentals - Exit Devices
• Electric Dogging for 80 Series Installation Instructions
• Mounting 80 Series Exit Device with Glass Bead Shim Kit Installation Instructions
• NB-8700 ET Trim Template
• Thru-Bolt for 80 Series 8700,8800 and 8900 Installation Instructions
• Video: 8700 Series Surface Vertical Rod Exit Device Installation
• Windstorm Solutions - Exit Devices