Sargent 5556-AD8610J LHR 32D CVR Exit Device - Exit Only

Sargent 5556-AD8610J LHR 32D CVR Exit Device, Exit Only is a Grade 1 concealed vertical rod exit bar designed for durability and security in commercial settings. This 42-inch exit device is engineered to accommodate doors up to 96 inches in height, featuring an elegant satin stainless steel finish that seamlessly blends into any architectural design. With electric latch retraction and a request-to-exit switch, this device ensures quick and efficient egress while maintaining safety standards. The Sargent 8600 Series is built to exceed ANSI/BHMA Grade 1 requirements, making it a reliable choice for high-traffic areas. Its modular construction and minimal moving parts translate to maintenance-free operation, allowing for long-term reliability. The device is specifically designed for standard width stile applications on hollow metal doors, supporting both single and double door configurations. Installation is straightforward, with standard machine screws included for mounting. The device is suitable for metal doors with a thickness of 1-3/4" to 2-1/4" and a minimum stile size of 4-1/2". With a limited 5-year warranty, the Sargent 5556-AD8610J offers peace of mind while enhancing the security of your facility.

CVR Exit Device, Exit Only

Grade 1 Concealed Vertical Rod Exit Bar, Wide Stile Pushpad, 42" Device, 96" Door Height, Exit Only, Electric Latch Retraction, Request to Exit Switch, Less Dogging, Satin Stainless Steel Finish, Left Hand Reverse

The Sargent 80 Series exit devices are ideal for environments that require strong and durable security solutions that will last the life of the building. Available in rim, mortise, surface vertical and concealed vertical rod configurations, these exit devices easily exceed ANSI/BHMA Grade 1 requirements for cycle and strength. With modular construction and few moving parts, the 80 Series devices are maintenance-free and provide unsurpassed security for any facility. Plus, options are available for unique applications including delayed egress, alarmed exit and electric latch retraction making these exit devices the go-to product in your building.

The Sargent 8600 Series provides simplicity, strength, and durability.

The 8600 Series is designed for standard width stile applications on hollow metal doors and has both single and double door applications.

• Door Types Metal Doors, 1-3/4" (44mm) minimum thickness.
• For doors over 1-3/4" to 2-1/4" thick, specify thickness and order as 31- 4-1/2" (114mm) minimum stile width
• Rails are available in 4 sizes, use door width to determine size needed.
• Rails will be factory cut to size, if door width is supplied
• E Rail for 24" to 32" door widths, No cutting required for 32" door
• F Rail for 33" to 36" door widths, No cutting required for 36" door
• J Rail for 37" to 42" door widths, No cutting required for 42" door
• G Rail for 43" to 48" door widths, No cutting required for 48" door
• Strike 650 Top Strike & 606 Bottom Strike (Panic and Fire Rated)
• Dogging Feature Hex key dogging standard on non fired rated devices; specify 16- for cylinder dogging (#41 cylinder supplied)
• Electric Options AL- Alarm
• BT- Beacon™
• PL- SARGuide™ Photoluminescent Coated
• TL- SARGuide™ Illuminated Touchpad
• 53- LX Latchbolt Monitor
• 54- Outside Lever Monitoring
• 55- Request-to-Exit Signal - Rail Monitoring
• 56- Remote Latch Retraction
• 57- Delay Egress & Electromagnets
• 58- Electric Dogging
• 59- Electroguard – Self Contained Delayed Egress
• Mounting Fasteners Supplied standard with machine screws
• Top Bolt: Stainless steel
• Device Centerline from Finished Floor: 41" (1041mm) for Standard Applications, 38" (965mm) for elementary schools and to meet local accessibility standards when a 100 Series Auxiliary Control is used
• Door/Opening Height: Must be specified - 120" (3048mm) Max Door Opening
• 96" max door height for HC and WS options
• Center Case Dimensions: 8-3/8" (213mm) x 2-5/8" (67mm)
• Projection: Pushbar Neutral – 3" (76mm), Pushbar Depressed – 2-1/8" (54mm)

Resources

• 16- 816 Cylinder Dogging Kit (80 Series Exit Device) Installation Instructions
• 16-LP/LR/LS8600 Low Profile Rail Assemblies Parts List
• 43-Flush End Cap Rail Cutting Installation Instructions
• 55-Signal Switch for 80 Series Installation Instructions
• 56-Electric Latch Retraction Exit Device Sell Sheet
• 565 & 665 Metal End Cap Kit Installation Instructions
• 57-Delayed Action 80 Series Exit Device Installation Instructions
• 57-Delayed Egress for 80 Series Exit Devices to ElectroLynx Connector System Installation
• 59-Electroguard Delayed Egress for 80 Series Exit Devices Installation Instructions
• 80 Series Brochure
• 80 Series Mechanical Panic Exit Device - Environmental Product Declaration (EPD)
• 816 Cylinder Dogging Kit Parts List
• 8600 Series Concealed Vertical Rod Exit Devices Cut Sheet
• 8600/8700/8800/8900 Wide Stile Rail Assemblies Parts List
• AL- Alarmed Exit Device Installation Instructions
• Basic Fundamentals - Exit Devices
• Electric Dogging for 80 Series Installation Instructions
• LR8600 Concealed Vertical Rod Series Active Mortise Case Assembly Parts List
• Mounting 80 Series Exit Device with Glass Bead Shim Kit Installation Instructions
• WD8600/12-WD8600/NB-WD8600/NB-12-WD8600 Concealed Vertical Rod Exit Device Installation Instructions
• Windstorm Solutions - Exit Devices