Sargent AD8440F ETL LHR BSP CVR Exit Device - Exit Only

Sargent AD8440F ETL LHR BSP CVR Exit Device, Exit Only is a Grade 1 concealed vertical rod exit device designed for exceptional security and longevity in commercial environments. This 36-inch device is crafted with a narrow stile pushpad, making it ideal for doors with a minimum thickness of 1-3/4 inches and a maximum height of 96 inches. Its left-hand reverse configuration features a durable freewheeling and vandal-resistant lever, ensuring reliable operation even in high-traffic areas. Built to exceed ANSI/BHMA Grade 1 standards for cycle and strength, the AD8440F is maintenance-free thanks to its modular construction and minimal moving parts. Hex key dogging is standard, offering ease of use while maintaining safety standards. The stylish black suede powder coat finish adds an aesthetic touch to any door setting. This exit device is UL Fire and Panic listed, ensuring compliance with safety regulations. With the capability to accommodate door widths from 33 to 36 inches and options for additional electric features like delayed egress or alarmed exit, the Sargent AD8440F is the go-to solution for securing your facility while providing efficient egress. Trust in the Sargent 80 Series for robust and reliable access control.

CVR Exit Device, Exit Only

Grade 1 Concealed Vertical Rod Exit Device, Narrow Stile Pushpad, 36" Device, 96" Door Height, Exit Only, L Freewheeling/Vandal Resistant Lever, Hex Key Dogging, Black Suede Powder Coat Finish, Left Hand Reverse

The Sargent 80 Series exit devices are ideal for environments that require strong and durable security solutions that will last the life of the building. Available in rim, mortise, surface vertical and concealed vertical rod configurations, these exit devices easily exceed ANSI/BHMA Grade 1 requirements for cycle and strength. With modular construction and few moving parts, the 80 Series devices are maintenance-free and provide unsurpassed security for any facility. Plus, options are available for unique applications including delayed egress, alarmed exit and electric latch retraction making these exit devices the go-to product in your building.

The most reliable exit device on the market.

The 8400 Series is designed for narrow stile applications and is UL Fire and Panic lsited. This series is available in several finishes.

• Door Types Hollow metal, 1-3/4" (44 mm) minimum thickness. For doors over 1-3/4" to 2-1/4" thick, specify thickness and order as 31- 1-3/4" (44mm) minimum stile width required. Stile must be hollow with inside dimension of at least 1-3/8" (35mm) square
• Rail sizes as Rails are available in 4 sizes, use door width to determine size needed. determined by Rails will be factory cut to size, if door width is supplied door width • E Rail for 24" to 32" door widths • F Rail for 33" to 36" door widths • J Rail for 37" to 42" door widths • G Rail for 43" to 48" door widths
• Strike 650 Top Strike & 606 Bottom Strike (Panic and Fire Rated)
• Dogging Feature Hex key dogging standard on non fired rated devices; specify 16- for cylinder dogging (#41 cylinder supplied)
• Electric Options AL- Alarm BT- Beacon™ PL- SARGuide™ Photoluminescent Coated TL- SARGuide™ Illuminated Touchpad 53- LX Latchbolt Monitor 54- Outside Lever Monitoring 55- Request-to-Exit Signal - Rail Monitoring 56- Remote Latch Retraction 57- Delay Egress & Electromagnets 58- Electric Dogging 59- Electroguard – Self Contained Delayed Egress
• Mounting Fasteners Supplied standard with machine screws
• Top Bolt Stainless steel
• Device Centerline from 41" (1041mm) for Standard Applications Finished Floor 38" (965mm) for elementary schools and to meet local accessibility standards when a 100 Series Auxiliary Control is used
• Door/Opening Height Must be specified - 120" (3048mm) Max Door Opening
• Center Case Dimensions 8-3/8" (213mm) x 2-5/8" (67mm)
• Projection Pushbar Neutral – 3" (76 mm) Pushbar Depressed – 2-1/8" (54mm)

Resources

• 16- 816 Cylinder Dogging Kit (80 Series Exit Device) Installation Instructions
• 43-Flush End Cap Rail Cutting Installation Instructions
• 55-Signal Switch for 80 Series Installation Instructions
• 56-Electric Latch Retraction Exit Device Sell Sheet
• 565 & 665 Metal End Cap Kit Installation Instructions
• 57-Delayed Action 80 Series Exit Device Installation Instructions
• 57-Delayed Egress for 80 Series Exit Devices to ElectroLynx Connector System Installation
• 59-Electroguard Delayed Egress for 80 Series Exit Devices Installation Instructions
• 80 Series Brochure
• 816 Cylinder Dogging Kit Parts List
• AD-8400, MD-8400& 12-MD-8400Series Concealed Vertical Rod Exit Device Installation Instructions
• AL- Alarmed Exit Device Installation Instructions
• Basic Fundamentals - Exit Devices
• Electric Dogging for 80 Series Installation Instructions
• Mounting 80 Series Exit Device with Glass Bead Shim Kit Installation Instructions
• Windstorm Solutions - Exit Devices