Sargent MD8606J RHR 32D CVR Storeroom Exit Device

Sargent MD8606J RHR 32D CVR Exit Device, Storeroom offers a robust solution for securing commercial spaces with its Grade 1 concealed vertical rod design. This exit device features a wide stile pushpad and is engineered for 42" doors, accommodating heights up to 96". The storeroom function enhances security by allowing access only to authorized personnel, while the hex key dogging feature provides added convenience for situations requiring door holding. Designed to meet and exceed ANSI/BHMA Grade 1 standards, the Sargent 8600 Series ensures durability and minimal maintenance with its modular construction and fewer moving parts. It is suitable for metal doors with a thickness ranging from 1-3/4" to 2-1/4", making it versatile for various applications. This exit device is ideal for standard width stile applications on hollow metal doors, suitable for both single and double door setups. The satin stainless steel finish not only adds an aesthetic appeal but also ensures longevity against wear and tear. With a limited 5-year warranty, you can trust the quality and reliability of the Sargent MD8606J for your security needs.

CVR Exit Device, Storeroom

Grade 1 Concealed Vertical Rod Exit Bar, Wide Stile Pushpad, 42" Device, 96" Door Height, Storeroom Function, Hex Key Dogging, Satin Stainless Steel Finish, Right Hand Reverse

The Sargent 80 Series exit devices are ideal for environments that require strong and durable security solutions that will last the life of the building. Available in rim, mortise, surface vertical and concealed vertical rod configurations, these exit devices easily exceed ANSI/BHMA Grade 1 requirements for cycle and strength. With modular construction and few moving parts, the 80 Series devices are maintenance-free and provide unsurpassed security for any facility. Plus, options are available for unique applications including delayed egress, alarmed exit and electric latch retraction making these exit devices the go-to product in your building.

The Sargent 8600 Series provides simplicity, strength, and durability.

The 8600 Series is designed for standard width stile applications on hollow metal doors and has both single and double door applications.

• Door Types Metal Doors, 1-3/4" (44mm) minimum thickness.
• For doors over 1-3/4" to 2-1/4" thick, specify thickness and order as 31- 4-1/2" (114mm) minimum stile width
• Rails are available in 4 sizes, use door width to determine size needed.
• Rails will be factory cut to size, if door width is supplied
• E Rail for 24" to 32" door widths, No cutting required for 32" door
• F Rail for 33" to 36" door widths, No cutting required for 36" door
• J Rail for 37" to 42" door widths, No cutting required for 42" door
• G Rail for 43" to 48" door widths, No cutting required for 48" door
• Strike 650 Top Strike & 606 Bottom Strike (Panic and Fire Rated)
• Dogging Feature Hex key dogging standard on non fired rated devices; specify 16- for cylinder dogging (#41 cylinder supplied)
• Electric Options AL- Alarm
• BT- Beacon™
• PL- SARGuide™ Photoluminescent Coated
• TL- SARGuide™ Illuminated Touchpad
• 53- LX Latchbolt Monitor
• 54- Outside Lever Monitoring
• 55- Request-to-Exit Signal - Rail Monitoring
• 56- Remote Latch Retraction
• 57- Delay Egress & Electromagnets
• 58- Electric Dogging
• 59- Electroguard – Self Contained Delayed Egress
• Mounting Fasteners Supplied standard with machine screws
• Top Bolt: Stainless steel
• Device Centerline from Finished Floor: 41" (1041mm) for Standard Applications, 38" (965mm) for elementary schools and to meet local accessibility standards when a 100 Series Auxiliary Control is used
• Door/Opening Height: Must be specified - 120" (3048mm) Max Door Opening
• 96" max door height for HC and WS options
• Center Case Dimensions: 8-3/8" (213mm) x 2-5/8" (67mm)
• Projection: Pushbar Neutral – 3" (76mm), Pushbar Depressed – 2-1/8" (54mm)

Resources

• 16- 816 Cylinder Dogging Kit (80 Series Exit Device) Installation Instructions
• 16-LP/LR/LS8600 Low Profile Rail Assemblies Parts List
• 43-Flush End Cap Rail Cutting Installation Instructions
• 55-Signal Switch for 80 Series Installation Instructions
• 56-Electric Latch Retraction Exit Device Sell Sheet
• 565 & 665 Metal End Cap Kit Installation Instructions
• 57-Delayed Action 80 Series Exit Device Installation Instructions
• 57-Delayed Egress for 80 Series Exit Devices to ElectroLynx Connector System Installation
• 59-Electroguard Delayed Egress for 80 Series Exit Devices Installation Instructions
• 80 Series Brochure
• 80 Series Mechanical Panic Exit Device - Environmental Product Declaration (EPD)
• 816 Cylinder Dogging Kit Parts List
• 8600 Series Concealed Vertical Rod Exit Devices Cut Sheet
• 8600/8700/8800/8900 Wide Stile Rail Assemblies Parts List
• AL- Alarmed Exit Device Installation Instructions
• Basic Fundamentals - Exit Devices
• Electric Dogging for 80 Series Installation Instructions
• LR8600 Concealed Vertical Rod Series Active Mortise Case Assembly Parts List
• Mounting 80 Series Exit Device with Glass Bead Shim Kit Installation Instructions
• WD8600/12-WD8600/NB-WD8600/NB-12-WD8600 Concealed Vertical Rod Exit Device Installation Instructions
• Windstorm Solutions - Exit Devices