Von Duprin CD9847EO 3 643E Grade 1 CVR Exit Device 643E

Von Duprin CD9847EO 3 643E Grade 1 CVR Exit Device 643E is designed to provide reliable and secure emergency exit solutions for commercial settings. This Grade 1 concealed vertical rod exit device features a wide stile pushpad and is suitable for doors between 80" to 100" in height. With a device length of 36", it is ideal for single or double metal doors, ensuring compliance with UL standards for panic exit hardware. The mechanism case boasts a smooth design, enhancing aesthetics while offering robust functionality. The device includes cylinder dogging, is field reversible, and is compatible with various trim options, allowing for tailored installation. Constructed with durability in mind, it features a deadlocking top and bottom bolt with a 5/8" throw, ensuring secure closure. Installation is straightforward, with fasteners included for doors 1-3/4" to 2-1/4" thick. The round, two-piece adjustable rods can accommodate doors up to 8'4", with extension rod kits available for taller installations. With an aged bronze finish, the CD9847EO not only meets practical needs but also adds a touch of elegance to any entrance. Trust in Von Duprin for quality and performance in your exit device requirements.

Grade 1 CVR Exit Device 643E

Grade 1 Concealed Vertical Rod Exit Bar, Wide Stile Pushpad, 36" Device, 80" to 100" Door Height, Exit Only, Cylinder Dogging, Less Cylinder, Aged Bronze Finish, Field Reversible

9847/9947 Concealed vertical rod device for use on single or double metal doors, UL listed for panic exit hardware. The 9847 device has a smooth mechanism case and the 9947 device has a grooved case.

The 9847 device has a smooth mechanism case.

The 9847 Series is for use on single or double metal doors, UL listed for panic exit hardware. Devices are ANSI A156.3 – 2008 Grade 1. 

• Device functions: Device ships EO/DT/NL. Field selectable. For TP, K or L remove NL drive screw from device.
• Device lengths: 2' 2' (610 mm) Door size 3' 2'4' to 3' (711mm to 914 mm) Door size 4' 2'10" to 4' (864 mm to 1219 mm) Door size
• Device centerline from finished floor: 395 /8" (1006 mm) Standard Adjustable from 355 /8" (905mm) to 495 /8" (1260mm) Center case dimensions 8" x 2 3/4" x2 3/8" (203mm x 70mm x 60mm)
• Mechanism case dimensions: 2 1/4" x 2 1/4" (57mm x 57mm)
• Projection: Pushbar neutral – 3 13/16" (97 mm) Pushbar depressed – 3 1/16" (78 mm)
• Latch bolt: Deadlocking top & bottom bolt, 5 /8" (16mm) throw
• Door undercut: 1 /4" (7mm) recommended
• Top & bottom Latch case: 4 1/2" x 2 1/8" x 1 1/2" (114mm x 54mm x 38mm)
• Vertical rods: Round 2-piece adjustable rods – Top rod adjustable from 6'8" (2027mm) to 8'4"(2533mm). Bottom rod adjustable 35 5/8" (905 mm) to 49 5/8" (1260 mm). Extension rod kits available for doors over 8'4" (2533mm).
• Fasteners & sex bolts (SNB): Includes screw pack for 1 3/4" (44mm) to 2 1/4" (57mm) thick metal doors. Optional 425 SNB available.

Resources

• 98/9947 Service Manual
• 98/9947F and 98/9948F Template
• 9847 Series Concealed Vertical Rod Exit Device Cut Sheet
• CX98/9947 and CX98/9948 Template
• CX98/9947WDC Installations Instructions
• Chexit (CX) Data Sheet
• EL, SS, CX9847WDC/9947WDC Series Device Hinge Stile Preparation Wood Door Template
• QEL 98/99 Baseplate Conversion Series Installation Instructions
• QEL Conversion Kit for 98/99 Series Installation Instructions
• QEL Data Sheet
• QEL Sell Sheet
• Quiet Electric Latch FAQ
• Von Duprin 33/35 and 98/99 ALK Alarm Kit Installation Instructions
• Von Duprin 33/35 and 98/99 End Cap Retrofit Kit Installation Instructions
• Von Duprin Exit Alarm Kit Sell Sheet
• Von Duprin Finishes Chart
• Von Duprin LD Cover Plate for 33/35 & 98/99 Exit Devices Installation Instruction
• Von Duprin Pneumatic Exit Device Installation Instructions