Von Duprin HDQEL9847NL-OP 3 32D Grade 1 CVR Exit Device 630

Von Duprin HDQEL9847NL-OP 3 32D Grade 1 CVR Exit Device 630 offers a reliable solution for emergency exits in commercial settings. This Grade 1 concealed vertical rod exit device features a wide stile pushpad and a 36-inch length, ensuring ease of use and accessibility. Designed for single or double metal doors, it is UL listed for panic exit hardware, adhering to ANSI/BHMA A156.3 2014 standards. The HDQEL9847NL-OP boasts a smooth mechanism case and is equipped with a night latch, ensuring secure locking while allowing quick egress. Its quiet electric latch retraction enhances user experience, making it ideal for high-traffic areas. Non-handed and easy to install, this device accommodates various door sizes, with height adjustments from 80 to 100 inches and suitable for door widths of 28 to 36 inches. Constructed from durable stainless steel with a satin finish, this exit device not only meets functional requirements but also complements modern architectural designs. With its deadlocking latch bolts and adjustable vertical rods, the Von Duprin HDQEL9847NL-OP is a dependable choice for enhancing safety and security in any commercial environment.

Grade 1 CVR Exit Device 630

Grade 1 Concealed Vertical Rod Exit Device, Wide Stile Pushpad, 36", Night Latch, No Pull, Less Dogging, Quiet Electric Latch Retraction, Satin Stainless Steel Finish, Non-Handed

9847/9947 Concealed vertical rod device for use on single or double metal doors, UL listed for panic exit hardware. These are certified to ANSI/BHMA A156.3 2014, Grade 1. The 9847 device has a smooth mechanism case and the 9947 device has a grooved case. The concealed vertical rod device is non-handed except when the following device options are used: SD (special dogging), or SS (signal switch).

The 9847 device has a smooth mechanism case.

The 9847 Series is for use on single or double metal doors, UL listed for panic exit hardware. Devices are ANSI A156.3 – 2008 Grade 1. 

• Device functions: Device ships EO/DT/NL. Field selectable. For TP, K or L remove NL drive screw from device.
• Device lengths: 2' 2' (610 mm) Door size 3' 2'4' to 3' (711mm to 914 mm) Door size 4' 2'10" to 4' (864 mm to 1219 mm) Door size
• Device centerline from finished floor: 395 /8" (1006 mm) Standard Adjustable from 355 /8" (905mm) to 495 /8" (1260mm) Center case dimensions 8" x 2 3/4" x2 3/8" (203mm x 70mm x 60mm)
• Mechanism case dimensions: 2 1/4" x 2 1/4" (57mm x 57mm)
• Projection: Pushbar neutral – 3 13/16" (97 mm) Pushbar depressed – 3 1/16" (78 mm)
• Latch bolt: Deadlocking top & bottom bolt, 5 /8" (16mm) throw
• Door undercut: 1 /4" (7mm) recommended
• Top & bottom Latch case: 4 1/2" x 2 1/8" x 1 1/2" (114mm x 54mm x 38mm)
• Vertical rods: Round 2-piece adjustable rods – Top rod adjustable from 6'8" (2027mm) to 8'4"(2533mm). Bottom rod adjustable 35 5/8" (905 mm) to 49 5/8" (1260 mm). Extension rod kits available for doors over 8'4" (2533mm).
• Fasteners & sex bolts (SNB): Includes screw pack for 1 3/4" (44mm) to 2 1/4" (57mm) thick metal doors. Optional 425 SNB available.

Resources

• 98/9947 Service Manual
• 98/9947F and 98/9948F Template
• 9847 Series Concealed Vertical Rod Exit Device Cut Sheet
• CX98/9947 and CX98/9948 Template
• CX98/9947WDC Installations Instructions
• Chexit (CX) Data Sheet
• EL, SS, CX9847WDC/9947WDC Series Device Hinge Stile Preparation Wood Door Template
• QEL 98/99 Baseplate Conversion Series Installation Instructions
• QEL Conversion Kit for 98/99 Series Installation Instructions
• QEL Data Sheet
• QEL Sell Sheet
• Quiet Electric Latch FAQ
• Von Duprin 33/35 and 98/99 ALK Alarm Kit Installation Instructions
• Von Duprin 33/35 and 98/99 End Cap Retrofit Kit Installation Instructions
• Von Duprin Exit Alarm Kit Sell Sheet
• Von Duprin Finishes Chart
• Von Duprin LD Cover Plate for 33/35 & 98/99 Exit Devices Installation Instruction
• Von Duprin Pneumatic Exit Device Installation Instructions