Von Duprin RX-QELA-7547L-DT-626-36-LHR-17 75 Series Narrow Stile QEL CVR Exit Device with RX, 360L-DT-17 Dummy Trim, LHR

Von Duprin RX-QELA-7547L-DT-626-36-LHR-17 KIT offers a robust solution for secure access control with its 75 Series Narrow Stile Quiet Electric Latch Retraction (QEL) and Concealed Vertical Rod (CVR) exit device. Designed for both single and double metal doors, this UL-listed device meets ANSI/BHMA A156.3 2014, grade 1 standards, ensuring reliability in panic exit situations. The QEL feature allows for quiet electronic control of the latch, making it ideal for environments that prioritize minimal operational noise. It ensures mechanical egress at all times while providing flexibility through access system integration, allowing authorized users to unlock the door temporarily. The device can also be configured to allow free entry for extended periods, eliminating the need for mechanical dogging. Featuring a sleek satin chrome finish (626/US26D), the device accommodates door sizes from 2' 6" to 4' and is compatible with various trim options, including dummy trim and lever functions. The RX-QELA incorporates a deadlocking latch bolt with a 5/8" throw and is designed with a low inrush current, making it compatible with standard power supplies. With easy installation and a focus on security and convenience, this exit device is a dependable choice for any building professional or knowledgeable homeowner.

KIT - 75 Series Narrow Stile QEL (Quiet Electric Latch Retraction), CVR (Concealed Vertical Rod) Exit Device, RX (Request to Exit Switch), 360L-DT-17 Dummy Lever Trim, LHR Left Hand Reverse, 36in x Up to 96in, No Dogging, Grade 1, 626/US26D Satin Chrome

The 7547 concealed vertical rod device for use on single or double metal doors, UL listed for panic exit hardware. These are certified to ANSI/BHMA A156.3 2014, grade 1. Quiet electric latch retraction (QEL) provides electronic control of an exit device for environments where limited operational noise is desired. These devices always provide mechanical egress. The electrified latch retraction can also be activated by an access system or building automation system to unlatch the exit device momentarily. Often the QEL is used with a credential reader and access control system to unlock the door momentarily for authorized users. The QEL can also be configured to electronically retract the latch for an extended period of time to allow free entry. This is a convenient alternative to mechanical dogging. If manual dogging required on a panic rated QEL device, the hex dogging option is available, to order specify HD-QEL. The QEL option is available on panic devices and fire rated devices. UL approved for class II circuit applications. The QEL option does not include the power transfer from door to frame, the power supply, or the control operator. Refer to EPT-2 power transfer and the PS902 or 914 power supply. The 900 Series power supply with the 2RS, 4RL or 4R board is the minimum required. Other option boards available for other functions, see 900 Series power supply for additional information. The QEL has a low in rush current, so it can be used with standard Schlage power supplies. Calculate the peak current draw of all devices in the system to determine the required amperage of the supply. The -2RS option board is designed to control two electric latch retraction devices and provide time delay between the firing of outputs is required. The power transfer is also sold separately.

Specifications:

• Device Functions: Device ships EO/DT/NL; field selectable
• Center Case: 9" x 1-5/8" x 2-3/8" (229mm x 41mm x 60mm)
• Device lengths:
• 3': 2' 6" to 3' (762mm to 914mm) door size
• 4': 3' to 4' (914mm to 1219mm) door size
• Device centerline from finished floor:
• 39-13/16" (1011mm)
• 39-11/16" (1008mm) with mullion
• Mechanism Case: 2-5/16" x 2-1/8" (59mm x 54mm)
• Latch Bolt: Deadlocking, 5/8" (15.875mm) throw
• Projection:
• Pushbar neutral - 3-13/16" (97mm)
• Pushbar depressed - 3-1/16" (78mm)
• Pushbar Length: 3' 18" (457mm), 4' 24" (610mm)
• Fasteners and Sex Bolts (SNB): Includes screw pack for 1-3/4" (4mm) and 2-1/4" (57mm) thick metal or wood doors (Optional 425 SNB available)
• Electrified Options:
• LX: Latch bolt monitor switch
• RX: Request to exit
• E: Electric locking and unlocking trim; no cylinder override
• ALK: Quiet electric latch retraction
• CON: Allegion Connect
• QEL: Quiet electric latch retraction
• Mechanical Options:
• GBK: Glass bead kit
• LBR: Less bottom rod
• SNB: Sex bolts
• SEC: Security screws
• WH: Weep holes
• Dogging Options:
• Hex key dogging standard
• CD: Cylinder dogging
• LD: Less dogging
• QEL: QEL options available
• Bolt retraction via switch
• Converts exit door to push-pull operation
• Voltage: 24VDC
• Current: 1.0 A inrush (0.5 sec.) / 0.14 A holding
• Strikes:
• 388: Top—Unfinished
• 385A: Bottom—unfinished

Trim Functions:

• EO: Exit only.
• No outside Trim
• DT: Dummy trim
• Pull when dogged (not recommended for fire device)
• NL: Night latch
• Key retracts latch bolt
• Rim cylinder
• NLOP: Night latch
• Key retracts latch bolt, optional pull required
• Rim cylinder
• L: Lever
• Key locks and unlocks
• 1-1/4" mortise cylinder
• Handed, reversible lever
• Electrified lever operation available
• LDT: Lever, rigid - dummy trim
• Pull when dogged (not recommended for fire device)
• LBE: Lever - blank escutcheon
• Always operable (no cylinder)
• TL: Turn lever
• Key locks and unlocks; or key unlocks, then relocks when key is removed (use with DT trim)
• 1-1/4" mortise cylinder
• TLBE: Turn lever - blank escutcheon
• Blank escutcheon always operable (no cylinder, use with DT trim)

Finishes:

• 605 - Bright brass
• 606 - Satin brass
• 612 - Satin bronze
• 619 - Satin nickel
• 625 - Bright chrome
• 626 - Satin chrome
• 628 - Aluminum, anodized
• 630 - Satin stainless steel
• 643e - Aged bronze
• 710 - Dark brown, anodized
• 711 - Matte black

Features

• Projection:
• 39-13/16" (1011mm)
• Mechanism Case: 2-5/16" x 2-1/8" (59mm x 54mm)
• RX: Request to exit
• 4': 3' to 4' (914mm to 1219mm) door size
• Latch Bolt: Deadlocking, 5/8" (15.875mm) throw
• GBK: Glass bead kit
• LD: Less dogging
• Device Functions: Device ships EO/DT/NL; field selectable
• SNB: Sex bolts
• Pushbar Length: 3' 18" (457mm), 4' 24" (610mm)
• CON: Allegion Connect
• Converts exit door to push-pull operation
• QEL: Quiet electric latch retraction
• Device lengths:
• Mechanical Options:
• Voltage: 24VDC
• Pushbar neutral - 3-13/16" (97mm)
• Electrified Options:
• 388: Top—Unfinished
• LX: Latch bolt monitor switch
• Current: 1.0 A inrush (0.5 sec.) / 0.14 A holding
• Hex key dogging standard
• Fasteners and Sex Bolts (SNB): Includes screw pack for 1-3/4" (4mm) and 2-1/4" (57mm) thick metal or wood doors (Optional 425 SNB available)
• E: Electric locking and unlocking trim; no cylinder override
• Bolt retraction via switch
• Strikes:
• ALK: Quiet electric latch retraction
• Pushbar depressed - 3-1/16" (78mm)
• Dogging Options:
• QEL: QEL options available
• 3': 2' 6" to 3' (762mm to 914mm) door size
• Device centerline from finished floor:
• 385A: Bottom—unfinished
• SEC: Security screws
• LBR: Less bottom rod
• CD: Cylinder dogging
• Center Case: 9" x 1-5/8" x 2-3/8" (229mm x 41mm x 60mm)
• 39-11/16" (1008mm) with mullion
• WH: Weep holes