To reuse the holes already drilled in a door or drawer front, a replacement cabinet pull needs the same hole spacing. This page lists the hole spacing (CTC, center to center) that Sietto prints for each of its pull collections, shows where the size in a pull's name is not its hole spacing, and quotes what Sietto says about its Adjustable pulls and about screws.
The figures come from the dimension lines at the bottom of each collection page on sietto.com, read on October 12, 2026. To measure the hole spacing, length and projection of the pull you are replacing, see our cabinet pull sizes guide.
Sietto pull hole spacing by collection
Inches, as printed on sietto.com:
| Collection | Pull | CTC |
|---|---|---|
| Glacier | pull, skinny pull | 3 |
| Reflective | pull | 3 |
| Texture | pull | 3 |
| Bandwidth | pull | 3-1/2 |
| Skyline | pull | 5 |
| Affinity | 6 inch | 5-5/8 |
| Affinity | 8 inch | 8 |
| Adjustable | 5-1/2 inch | presented at 3-1/2 |
| Adjustable | 7 inch | presented at 5 |
| Adjustable | 9 inch | presented at 7 |
| Eternity | finger pull | 1-5/8 |
| Eternity | 4, 6, 8, 12, 18 inch | 4, 6, 8, 12, 18 |
| Natoma, Seneca | 4, 6, 8, 12 inch | 4, 6, 8, 12 |
| Fusion, Hammered and Brushed | 1-3/8 inch | 1-3/8 |
| Fusion, Hammered and Brushed | 4, 6, 8, 12 inch | 4, 6, 8, 12 |
| Fold | finger pull | 3/4 |
| Fold | 4, 6, 8 inch | 4, 6, 8 |
The Reflective page also lists the Cirrus and Stratum pieces, and the Texture page the Reed and Honeycomb pieces; each of these pages prints one line for all its pulls. Some pulls have numbers that start with K: the 1-3/8 inch pulls (K-2000 Fusion, K-2001 Brushed, K-2002 Hammered) and the Fold finger pull, listed under 3/4 inch as K-2006.
The knob lines on Sietto's collection pages print no CTC. They give a size and a projection only; the Glacier round knobs, for example, are listed at 1-1/4 inch diameter with a 1 inch projection.
When the size in the name is not the hole spacing
- Affinity 6 inch pulls: Sietto lists them at 5-1/8 x 1-1/4 inches (6 x 1-1/4 with metal bases) with a 5-5/8 inch CTC. The 8 inch pulls are 7-1/2 x 1-1/4 inches (8-3/8 x 1-1/4 with metal bases) with an 8 inch CTC.
- Adjustable 5-1/2, 7 and 9 inch pulls: listed at 5-1/2 x 1, 7 x 1 and 9 x 1 inches, with an adjustable CTC presented at 3-1/2, 5 and 7 inches (see below).
- Glacier, Reflective, Texture, Bandwidth and Skyline pulls carry no size in the name; Sietto prints their CTC as 3, 3, 3, 3-1/2 and 5 inches (table above).
In the Eternity, Natoma, Seneca, Fusion, Hammered and Brushed and Fold lists, the size in the heading matches the CTC that Sietto prints. The Fold 4 inch pull, for example, is listed at 5 x 2 inches with a 4 inch CTC.
Sietto Adjustable pulls
Sietto introduces the Adjustable collection with these words: "Whether replacing hardware on existing cabinets or installing new cabinets, the adjustability of these bases paired with glass length options, provide the flexibility you want." The dimension lines on its Adjustable page read:
- All 5-1/2" pulls: 5-1/2" x 1", 1-3/8" projection, Adjustable CTC - presented at 3-1/2"
- All 7" pulls: 7" x 1", 1-3/8" projection, Adjustable CTC - presented at 5"
- All 9" pulls: 9" x 1", 1-3/8" projection, Adjustable CTC - presented at 7"
Sietto prints no minimum or maximum spacing for these pulls. Our product page for the Adjustable pull P-1900-7-PC gives the Center To Center as adjustable.
Sietto Digital Catalog and sietto.com
The Sietto Digital Catalog (PDF, 16 pages; the Fold, Seneca and Natoma pages are marked (c)2023, the others (c)2022) prints a CTC only for the Fold, Seneca, Natoma, Fusion, Eternity and Hammered and Brushed pulls. It has no 18 inch Eternity pull and no CTC for the Eternity finger pull, and it gives the Adjustable projection as 1-1/2 inches where sietto.com prints 1-3/8. Where the two differ, this page follows sietto.com.
Mounting notes Sietto prints
- Affinity: "Knobs can be mounted with the glass down or to the side."
- Skyline: "Pulls can be mounted horizontally or vertically."
Screws Sietto lists
All 15 collection pages on sietto.com carry the same two sentences:
- The base on our Sietto decorative hardware utilizes an 8/32 screw. We include 1" and 1-1/2" screws with each order.
This is Sietto's statement about its own orders. The Sietto product pages shown under this post do not mention screws, so if you need them, ask us before you order.
Replacing one piece of a set
The Adjustable, Affinity, Bandwidth, Geometric, Hexagon, Skyline and Texture pages say: "All products are handcrafted and may possess slight variations in color and size." Glacier and Reflective print the same sentence with "hand crafted". The Eternity, Fold, Fusion, Hammered and Brushed, Natoma and Seneca pages say: "All products may possess slight variations in color and size." A new piece can therefore differ slightly from the ones already on your cabinets.
Sietto pulls at The Builders Supply
- 1-3/8 inch CTC: Fusion K-2000-MB-PC
- 1-5/8 inch CTC: Eternity finger pull FP-2003-PC
- 3 inch CTC: Glacier P-207-PC
- 3-1/2 inch CTC: Bandwidth P-1400-SN
- 4 inch CTC: Eternity 4 P-2003-4-G
- 5 inch CTC: Skyline P-1800-SN
- 8 inch CTC: Affinity 8 P-1202-8-PC
- All Sietto products, cabinet pulls and cabinet knobs and pulls
Need help matching an existing hole spacing? Our customer support team is available Monday - Friday, 8 AM - 4 PM Central Time, at 1-888-800-7789 or [email protected].
Related Products
