Jacknob pilaster shoes carry their size in the product name, while the mounting drawings for anchor packs and headrail parts are on separate one-page Jacknob sheets. This page explains how to read a Jacknob pilaster shoe size and links the Jacknob installation instructions and drawings for the parts we list.
Jacknob installation instructions for anchor packs and headrail packs
Each sheet below is a one-page Jacknob PDF with an assembly drawing. For mounting, follow the Jacknob sheet for your part.
- 31056 anchoring pack (revised 12/1/09) for pilaster posts 3/4 inch thick and larger and 3 inches wide and larger; the Jacknob catalog lists it for 3/4 to 1-1/4 inch posts.
- 30719 anchoring pack (revised 7/17/07), marked "For all thickness Posts"; the Jacknob catalog lists it for 7/8 to 1-1/4 inch posts.
- 74031 anchoring pack (copyright 2019) for 1-1/4 and 1-1/8 inch posts.
- Ceiling anchor packs for floor to ceiling installations (copyright 2018) for 119739 (3/4 inch post thickness), 105419 (7/8), 111759 (1), 103729 (1-1/8) and 131089 (1-1/4); one pack for post widths of 3 to 5 inches, two for 6 to 17, three for 18 and over; notes "USE OFFSET SHOES".
- 15790, 15793, 15799 headrail mounting pack (copyright 2009); labels three 1350 brackets and a 6675 part.
- 15762, 15772, 15782 headrail connector pack (revised 12/27/07) with three numbered steps, a drawing and the pack contents.
Jacknob line drawings: pilaster shoe sizes, headrail and brackets
Jacknob's part pages call these one-page PDFs line drawings. Each shoe drawing covers one series and lists the inside dimension "A" for each part number. This is a selection; other widths and heights have their own sheets.
- 34009 series (2019) for shoes 1 inch wide, 3 inches high
- 34005 series (2019) for open end shoes, 1 inch wide, 3 inches high; names screw pack 60269
- 30009 series (2021) for anchor shoes, 1 inch wide, 3 inches high; shows the mounting holes
- 54009 series (2019) for offset shoes, 1 inch wide, 4 inches high
- 61009 series (2021) for round end shoes, 1-1/4 inch wide, 3 inches high
- 80042 headrail (revised 3/26/07), 2169 headrail bracket (revised 11/08/07) and 135009 to 135039 pilaster support brackets (revised 7/18/16)
The linked sheets dated 2018 and later carry the note "All dimensions shown are approximate. Do not predrill or fabricate based on dimensions shown." Not every part has a sheet: Jacknob's Pilaster Anchoring Packs group showed a line drawing for 11 of its 24 parts when we checked. If a link fails, look up the part number on Jacknob's website.
Where these parts are in the Jacknob catalog
The Jacknob catalog (PDF, 172 pages) gives a photo, a short description and a table of part numbers for each group below, without mounting drawings. Page numbers are the printed ones; in the PDF file add 10.
| Page | Group | Examples |
|---|---|---|
| 92-93, 96-97 | Sleeve style shoes, 3 and 4 inch | 34129, 44129 |
| 94 | Round end and anchor shoes | 61129, 30049 |
| 95, 99-100 | Open end shoes | 32245 |
| 98-99 | Offset shoes, 4 inch | 54249 |
| 102-103 | Pilaster support brackets | 8503, 135039 |
| 104-105 | Pilaster anchor kits | 119739, 31056 |
| 106 | Pilaster mounting bars | 65129 |
| 108-109 | Headrail, end plugs, brackets | 80042, 2169 |
| 120 | Floor and wall anchors | 8106 |
The Part Number Index at the back gives the page for a part number: 31056 is indexed to page 105. Some parts we list, such as 15799, are not in the index.
The Jacknob catalog page hosted on our site, page 5 of an earlier catalog (PDF), charts pivot hinge replacement packs, not shoes, anchors or headrail.
How to read a Jacknob pilaster shoe size
Jacknob names a shoe by three dimensions: on Jacknob's website part 34129 is PILASTER SHOE 12"L X 1"W X 3"H. Our title for the 4 inch high version is Jacknob 44129 12" Pilaster Shoe - 1" W x 4" H.
- L: the Length column of the catalog, 2 to 24 inches for sleeve style shoes.
- W: Width in the catalog, Thickness in the part details on Jacknob's website; it equals the post size printed above each catalog table (3/4, 7/8, 1 or 1-1/4 inch for sleeve style shoes).
- H: the shoe height, 3 or 4 inches.
For sleeve style, open end and offset shoes the catalog states: "All measurements reflect the finished size of the pilaster." L and W are therefore the size of the pilaster. On the 34009 series drawing the inside dimension of the 12 inch shoe is 12-1/32 inches.
Style words in the name, in Jacknob's descriptions:
- Sleeve style (no extra word): mounted on the bottom of the pilaster; covers the pilaster's anchoring system.
- Open end, such as 32245: "Shoes are only welded at one end to allow for easy replacement of damaged shoes."
- Offset, such as 54249: 4 inches high, with a wider bottom to cover an anchoring system wider than the pilaster thickness.
- Anchor style, such as 30049: 3 inches high; the catalog lists screw pack 419 for mounting one shoe to the floor.
Anchoring and headrail parts we list
- Anchor packs: floor packs such as 31056 and ceiling packs such as 119739; the catalog says ceiling mount kits are for posts that are also floor mounted.
- Pilaster support brackets: per the catalog also known as pilaster feet, for pilasters which do not come to the floor; the stamped 135039 is the 1-1/4 inch size.
- Pilaster mounting bars: per the catalog they secure posts to the floor; 65129 is listed for a 12 inch post.
- Headrail: Antigrip aluminum headrail for 3/4, 1 and 1-1/4 inch posts; the catalog lists 8-1/2, 10 and 12 foot lengths, for example 80042.
- Headrail parts: wall brackets such as 2169, connector packs such as 15782, end plugs and bracing packs.
"Cross Instructions" in our Jacknob product titles
Some of our Jacknob titles end in "Cross Instruction", "Cross Instructions" or "with Installation Instructions", for example Jacknob 15799 Headrail Bracing Pack (3) Angle Brackets - Cross Instructions. These listings are the hardware itself, not an instruction sheet. On the pages we checked, the words stand where Jacknob's own part name has CRSS: Jacknob's website names this part HEADRAIL BRACING PACK (3) ANGLE BRACKETS - CRSS. We counted 24 part names with CRSS in Jacknob's pilaster anchoring and headrail groups, all 24 listed as stainless steel. The title is not a promise of a printed sheet in the pack.
Jacknob shoes, anchors and headrail at The Builders Supply
- All Jacknob products
- Toilet partition hardware category
- Related guide: Bradley toilet partition hardware parts
Not sure which shoe size or anchor pack matches your pilaster? Our customer support team is available Monday - Friday, 8 AM - 4 PM Central Time, at 1-888-800-7789 or [email protected].
Related Products
